TWS Proud

I’m most proud of this weld. To me, aluminum was the hardest to weld and not show the heat in the back. I learned how to control the placement of my heat with this particular weld. I kept wanting to put all of the heat on the bottom plate. I eventually figured out that you don’t burn through when you don’t put all of your heat on the bottom. Also, I found a technique that works to make it look correctly. Make an “M” when welding the two together. Great pattern for it. That was the hardest was not walking the cup too!

This blog has been labeled as archived as it may no longer contain the most up-to-date data. For a list of all current blog posts, please visit our blog homepage at https://www.tws.edu/blog/